Menu

Ed’s 70 Duster Build

Ed taking his 70 Duster from Shell to Awesome Show Stopper. Too many upgrades to mention but this will be a Duster with 6.1L Hemi with NAG1 Trans,

382206258_10160200272322875_8819125451255286933_n
PXL_20230510_165955692
PXL_20230627_192908451.MP
PXL_20230627_192914365.MP
PXL_20230630_173705936
PXL_20240904_193934768.MP
PXL_20240909_175540822
PXL_20240909_175543247
PXL_20240909_214809852.MP
PXL_20240909_221211417
PXL_20240918_190044273
PXL_20241001_170826838.MP
PXL_20241001_170856516.MP
PXL_20240903_173044478
PXL_20240918_203657602
PXL_20241003_185731039
PXL_20241015_163755272
PXL_20241015_163759355.MP
PXL_20241015_164034719
PXL_20240911_233447130.MP
PXL_20241031_174413774.MP
PXL_20241016_190259487.MP
PXL_20240828_134619397.MP
PXL_20241030_163046574
PXL_20241031_174426992.MP

Videos

Engine install was not without challenges. Due to the Header design we had to install the motor from the bottom. We thought we had room until we went to install it. Found out we had to remove right Valve cover along with right header and Alternator. After that it slid right in. Well almost. However it is in and buttoned up.